Sec. 22.529  Application requirements for the Paging and Radiotelephone 
          Service.

    In addition to information required by subparts B and D of this 
part, applications for authorization in the Paging and Radiotelephone 
Service must contain the applicable information and data described in 
this section.
    (a) Administrative information. The following information, 
associated with Form FCC 600, Schedule A, is required as indicated. Each 
application of any type, including applications for paging geographic 
area authorizations, must contain one and only one Schedule A.
    (1) The purpose of the filing is required for each application of 
any type.
    (2) The geographic area designator, channel and geographic area name 
are required only for each application for a paging geographic area 
authorization.
    (3) The FCC control point number, if any, the location (street 
address, city or town, state), the telephone number and an indication of 
the desired database action are required only for each application 
proposing to add or delete a control point.
    (4) The FCC location number, file number and location (street 
address, city or town, state) of authorized facilities that have not 
been constructed are required only for each application requesting an 
extension of time to construct those facilities.
    (b) Technical data. The following data, associated with FCC Form 
600, Schedule B, are required as indicated for each application that is 
not an application for a paging geographic area authorization. 
Applications for a paging geographic area authorization must not contain 
Schedule B. Other type of applications may contain as many Schedule Bs 
as are necessary for the intended purpose.
    (1) For each transmitting antenna site to be added, deleted or 
modified, the following are required: An indication of the desired 
database action, the FCC location number, if any, the street address or 
other description of the transmitting antenna site, the city, county and 
state, the geographical coordinates (latitude and longitude), correct to 
&177;1 second, of the transmitting antenna site (NAD 27 required, 
NAD 83 optional), and in the case of a proposed relocation of a 
transmitting antenna, the FCC location number and geographical 
coordinates, correct to &177;1 second, of the current 
transmitting antenna site, and an indication of the datum (NAD 27 or NAD 
83) to which the geographical coordinates of the current location are 
referenced.
    (2) For each transmitting antenna site to be added, deleted or 
modified, the following supplementary information is required: An 
indication as to whether or not the transmitting antenna site is within 
200 kilometers (124 miles) of the U.S.-Mexico border, and an indication 
as to whether or not the transmitting antenna site is North of Line A or 
East of Line C. Line A and Line C are defined in Sec. 2.1 of this 
chapter. For each adjacent geographic area within 200 kilometers (124 
miles) of each transmitting antenna site to be added, deleted or 
modified, the geographic area designator and name, and the shortest 
distance (in kilometers) to the boundary of that geographic area.
    (3) For each antenna to be added, deleted or modified, the following 
is required: An indication of the desired database action, an indication 
of whether the antenna already exists or is merely proposed, the FCC 
antenna number, if any, the type of antenna (e.g., collinear, Yagi, 
half-wave, corner reflector, panel, etc.), the name of the antenna 
manufacturer and the model number of the antenna, the height (in meters) 
above average terrain of the center of radiation of the antenna, the 
beamwidth of the main lobe of the horizontal radiation pattern of the 
electric

[[Page 146]]

field of the antenna, the height (in meters) to the tip of the antenna 
above ground level, a polar plot of the horizontal gain pattern of the 
antenna, the antenna gain in the maximum lobe and the electric field 
polarization of the wave emitted by the antenna when installed as 
proposed.
    (i) For each transmitter to be added, deleted or modified, the 
following is required: the FCC transmitter number, if any, an indication 
of the desired database action, the center frequency of the requested 
channel, the transmitter classification (e.g. base, fixed mobile), the 
designator for any non-standard emission type to be used, including 
bandwidth and modulation type, and the maximum effective radiated power.
    (ii) For each of the eight cardinal radials, the antenna height 
above the average elevation along the radial, and the effective radiated 
power of each transmitter in the direction of the radial.
    (iii) For each transmitter proposed to transmit on a channel 
reserved for point-to-multipoint operation involving transmission to 
four or more points of communications (i.e. base transmitters), the 
following is required for each point of communication: an indication of 
the desired database action, the FCC transmitter number or other key 
indicator (e.g., I, II, III, IV), the location (city or town, state), 
and the geographical coordinates (latitude and longitude, NAD ).
[62 27 FR 11635 , Mar. 12, 1997]

                            Paging Operation