Sec. 22.559  Paging application requirements.

    In addition to information required by subparts B and D and 
Sec. 22.529, applications for authorization to operate a paging 
transmitter on the channels listed in Sec. 22.531, other than 
applications for a paging geographic area authorization, must contain 
the applicable supplementary information described in this section.
    (a) Interference exhibit. Except as provided in paragraph (b) of 
this section, an exhibit demonstrating compliance with Sec. 22.537 with 
regard to protected transmitters is required for applications to operate 
a transmitter on the VHF channels. This exhibit must:
    (1) Identify each protected transmitter located within 109 
kilometers (68 miles) of the proposed transmitter in directions in which 
the distance to the interfering contour is 76.5 kilometers (47.5 miles) 
or less, and within 178 kilometers (111 miles) of the proposed 
transmitter in directions in which the distance to the interfering 
contour exceeds 76.5 kilometers (47.5 miles).
    (2) For each protected transmitter identified, show the results of 
distance calculations indicating that there would be no overlap of 
service and interfering contours, or alternatively, indicate that the 
licensee of or applicant for the protected transmitter and/or the 
applicant, as required, have agreed in writing to accept any 
interference resulting from operation of the proposed transmitter.
    (b) Encompassment exhibit. An exhibit showing that the area within 
the interfering contour of the proposed transmitter would be totally 
encompassed by interfering contours of operating co-channel base 
transmitters controlled by the applicant is required for applications to 
operate a transmitter with ERP exceeding the basic power and height-
power limits of Sec. 22.535. For VHF transmitters, this encompassment 
exhibit may substitute for the interference exhibit required in 
paragraph (a) of this section.
[ 59 FR 59507 , Nov. 17, 1994, as amended at  62 FR 11636 , Mar. 12, 1997]

                   One-way or Two-way Mobile Operation