Sec. 26.52  RF hazards.

    (a) Licensees and manufacturers are required to ensure that their 
facilities and equipment comply with IEEE C95.1-1991. Measurement 
methods are specified in IEEE C95.3-1991. Copies of these standards are 
available from IEEE Standards Board, 445 Hoes Lane, P.O. Box 1331, 
Piscataway, NJ 08855-1331. Telephone: 1-800-678-4333. The limits for 
both ``controlled'' and ``uncontrolled'' environments, as defined by 
IEEE C95.1-1991, will apply to all GWCS base and mobile stations, as 
appropriate. The application for equipment authorization must contain a 
statement confirming compliance with IEEE C95.1-1991. Technical 
information showing the basis for this statement must be submitted to 
the Commission upon request.
    (b) GWCS hand-held devices whose maximum radiated power is 100 
milliwatts or less are not required to be evaluated for compliance with 
ANSI/IEEE SAR (specific absorption rate) requirements, as long as 2.5 cm 
separation distance is maintained between the radiating structure and 
the body of the user. (The ANSI/IEEE standard uses the term ``radiated 
power,'' meaning input power to the antenna.)
    (c) For further information on the Commission's environmental rules 
see Secs. 1.1301 through 1.1319 of this chapter.