Sec. 68.214  Changes in registered equipment and circuitry.

    Changes in registered terminal equipment or registered protective 
circuitry shall be made as follows:
    (a) No change in registered terminal equipment or registered 
protective circuitry that would result in any change in the information 
furnished the Commission pursuant to Sec. 68.200 may be made, except 
after grant of a new application made on FCC Form 730.
    (b) Changes which do not result in any change in the information 
furnished the Commission pursuant to Sec. 68.200 may be made without 
express

[[Page 267]]

Commission approval. Provided, That prior written notification is given 
the Commission on FCC Form 730.
    (c) Where equipment is registered by virtue of incorporation of 
registered protective circuitry therein, no notification need be given 
of changes to other than the protective circuitry, its mechanical and 
electrical connections to the equipment.
    (d) Changes in registered terminal equipment or registered 
protective circuity made pursuant to paragraphs (b) and (c) of this 
section may be made only by the grantee, or an authorized agent thereof, 
and the grantee will remain responsible for the performance of such 
changes.
    (e) Operations associated with installing, connecting, reconfiguring 
or removing (other than final removal) premises wiring to registered 
terminal equipment or registered protective circuitry are changes in 
this equipment or circuitry within the meaning of this Section, unless:
    (1) The premises wiring involved is ``fully-protected'' premises 
wiring, or
    (2) All such operations are performed in accordance with 
Sec. 68.215.

[42 1997 FR 32244 , June 24, 1977, as amended at  43 FR 16499 , April 19, 1978]