Sec. 73.614 Power and antenna height requirements.
(a) Minimum requirements. Applications will not be accepted for
filing if they specify less than -10 dBk (100 watts) horizontally
polarized visual effective radiated power in any horizontal direction.
No minimum antenna height above average terrain is specified.
(b) Maximum power. Applications will not be accepted for filing if
they specify a power which exceeds the maximum permitted boundaries
specified in the following formulas:
(1) Channels 2-6 in Zone I:
ERPMax=102.57-33.24*Log10(HAAT)
And,
-10 dBk ERPMax20 dBk
(2) Channels 2-6 in Zones II and III:
ERPMax=67.57-17.08* Log10 (HAAT)
And,
10 dBk ERPMax20 dBk
(3) Channels 7-13 in Zone I:
ERPMax=107.57-33.24* Log10 (HAAT)
And,
-4.0 dBk ERPMax25 dBk
(4) Channels 7-13 in Zones II and III:
ERPMax=72.57-17.08* Log10 (HAAT)
And,
15 dBk ERPMax25 dBk
(5) Channels 14-69 in Zones I, II, and III:
[[Page 177]]
ERPMax=84.57-17.08* Log10 (HAAT)
And,
27 dBk ERPMax37 dBk
Where:
ERPMax=Maximum Effective Radiated Power measured in decibels
above 1 kW (dBk).
HAAT=Height Above Average Terrain measured in meters.
The boundaries specified are to be used to determine the maximum
possible combination of antenna height and ERPdBk. When
specifying an ERPdBk less than that permitted by the lower
boundary, any antenna HAAT can be used. Also, for values of antenna HAAT
greater than 2,300 meters the maximum ERP is the lower limit specified
for each equation.
(6) The effective radiated power in any horizontal or vertical
direction may not exceed the maximum values permitted by this section.
(7) The effective radiated power at any angle above the horizontal
shall be as low as the state of the art permits, and in the same
vertical plane may not exceed the effective radiated power in either the
horizontal direction or below the horizontal, whichever is greater.
(c) Determination of applicable rules. The zone in which the
transmitter of a television station is located or proposed to be located
determines the applicable rules with respect to maximum antenna heights
and powers for VHF stations when the transmitter is located in Zone I
and the channel to be employed is located in Zone II, or the transmitter
is located in Zone II and the channel to be employed is located in Zone
I.
[ 28 FR 13660 , Dec. 14, 1963, as amended at 42 FR 20823 , Apr. 22, 1977;
42 FR 48881 , Sept. 26, 1977; 47 FR 35990 , Aug. 18, 1982; 50 FR 23698 ,
June 5, 1985; 56 FR 49707 , Oct. 1, 1991; 58 FR 51250 , Oct. 1, 1993]
CiteFind - See documents on FCC website that
cite this rule
Want to support this service?
Thanks!
Report errors in
this rule. Since these rules are converted to HTML by machine, it's possible errors have been made. Please
help us improve these rules by clicking the Report FCC Rule Errors link to report an error.