Goto Section: 74.1281 | 74.1284 | Table of Contents
FCC 74.1283
Revised as of October 1, 2005
Goto Year:2004 |
2006
Sec. 74.1283 Station identification.
(a) The call sign of an FM broadcast translator station will consist of the
initial letter K or W followed by the channel number assigned to the
translator and two letters. The use of the initial letter will generally
conform to the pattern used in the broadcast service. The two letter
combinations following the channel number will be assigned in order and
requests for the assignment of particular combinations of letters will not
be considered.
(b) The call sign of an FM booster station will consist of the call sign of
the primary station followed by the letters “FM” and the number of the
booster station being authorized, e.g., WFCCFM–1.
(c) A translator station authorized under this subpart shall be identified
by one of the following methods.
(1) By arranging for the primary station whose station is being rebroadcast
to identify the translator station by call sign and location. Three such
identifications shall be made during each day: once between 7 a.m. and 9
a.m., once between 12:55 p.m. and 1:05 p.m. and once between 4 p.m. and 6
p.m. Stations which do not begin their broadcast before 9 a.m. shall make
their first identification at the beginning of their broadcast days. The
licensee of an FM translator whose station identification is made by the
primary station must arrange for the primary station licensee to keep in its
file, and to make available to FCC personnel, the translator's call letters
and location, giving the name, address and telephone number of the licensee
or his service representative to be contacted in the event of malfunction of
the translator. It shall be the responsibility of the translator licensee to
furnish current information to the primary station licensee for this
purpose.
(2) By transmitting the call sign in International Morse Code at least once
each hour. Transmitters of FM broadcast translator stations of more than 1
watt transmitter output power must be equipped with an automatic keying
device that will transmit the call sign at least once each hour, unless
there is in effect a firm agreement with the translator's primary station as
provided in Sec. 74.1283(c)(1) of this section. Transmission of the call sign
can be accomplished by:
(i) Frequency shifting key; the carrier shift shall not be less than 5 kHz
nor greater than 25 kHz.
(ii) Amplitude modulation of the FM carrier of at least 30 percent
modulation. The audio frequency tone use shall not be within 200 hertz of
the Emergency Broadcast System Attention signal alerting frequencies.
(d) FM broadcast booster stations shall be identified by their primary
stations, by the broadcasting of the primary station's call signs and
location, in accordance with the provisions of Sec. 73.1201 of this chapter.
(e) The Commission may, in its discretion, specify other methods of
identification.
[ 55 FR 50699 , Dec. 10, 1990]
Goto Section: 74.1281 | 74.1284
Goto Year: 2004 |
2006
CiteFind - See documents on FCC website that
cite this rule
Want to support this service?
Thanks!
Report errors in
this rule. Since these rules are converted to HTML by machine, it's possible errors have been made. Please
help us improve these rules by clicking the Report FCC Rule Errors link to report an error.
hallikainen.com
Helping make public information public