Goto Section: 80.292 | 80.301 | Table of Contents

FCC 80.293
Revised as of October 1, 2005
Goto Year:2004 | 2006
Sec.  80.293   Check bearings by authorized ship personnel.

   The requirement for calibration by check bearings is met if:

   (a) The required verification by check bearings are made not more than 90
   days prior to the date of the annual detailed inspection of the
   radiotelegraph station;

   (b) The verification consists of a comparison of simultaneous visual and
   radio direction finder bearings. At least one comparison bearing must be
   taken in each quadrant, within plus or minus 20 degrees from the following
   bearings relative to the ship's heading: 45 degrees; 135 degrees; 225
   degrees; 315 degrees;

   (c) The verification shows the visual bearing relative to the ship's heading
   and the difference between the visual and radio direction finder bearing,
   and the date each check bearing is taken.

   [ 51 FR 31213 , Sept. 2, 1986. Redesignated at  68 FR 46973 , Aug. 7, 2003]

Subpart G—Safety Watch Requirements and Procedures

Coast Station Safety Watches


Goto Section: 80.292 | 80.301

Goto Year: 2004 | 2006
CiteFind - See documents on FCC website that cite this rule

Want to support this service?
Thanks!

Report errors in this rule. Since these rules are converted to HTML by machine, it's possible errors have been made. Please help us improve these rules by clicking the Report FCC Rule Errors link to report an error.
hallikainen.com
Helping make public information public