Goto Section: 101.807 | 101.811 | Table of Contents
FCC 101.809
Revised as of October 1, 2008
Goto Year:2007 |
2009
Sec. 101.809 Bandwidth and emission limitations.
(a) Stations in this service operating on frequencies in the 27.23–27.28 MHz
band will be authorized to employ only amplitude modulated or frequency
modulated emission for radiotelephony. The authorization to use such
emissions will be construed to include authority to employ unmodulated
emission only for temporary or short periods necessary for equipment testing
incident to the construction and maintenance of the station.
(b) Stations in the service operating on frequencies above 940 MHz may be
authorized to use amplitude modulated, frequency modulated or pulse type of
emission for radiotelephony and television. In addition, the use of
unmodulated emission may be authorized in appropriate cases.
(c) The maximum bandwidths which will normally be authorized for single
channel operation on frequencies below 500 MHz in this service must not
exceed the limits set forth below:
Type of emission Authorized bandwidth (kHz)
A3E 8
F3E or (G3E) 40
(d) Maximum bandwidths in the following frequency bands must not exceed the
limits set forth below:
Maximum Authorized
Frequency band (MHz) Bandwidth (MHz)
3,700 to 4,200 ^120
5,925 to 6,425 ^130
6,425 to 6,525 25
10,700 to 12,200 ^1,240
13,200 to 13,250 25
21,200 to 23,600 ^150
^1The maximum bandwidth that will be authorized for each particular
frequency in this band is detailed in the appropriate frequency table in
Sec. 101.147.
^2As of March 1, 2005, no new LTTS operators will be licensed in the
11.7–12.2 GHz band. LTTS operators authorized prior to March 1, 2005 may
continue to operate in 11.7–12.2 GHz band until their license expires; no
existing LTTS licensees will be renewed in the 11.7–12.2 GHz band.
(e) The bandwidths authorized on frequencies above 500 MHz must be
appropriate to the type of operation in any particular case. An application
requesting such authorization must fully describe the modulation, emission,
and bandwidth desired and must specify the bandwidth to be occupied.
[ 61 FR 26677 , May 28, 1996, as amended at 68 FR 4961 , Jan. 31, 2003; 70 FR 4788 , Jan. 31, 2005]
Goto Section: 101.807 | 101.811
Goto Year: 2007 |
2009
CiteFind - See documents on FCC website that
cite this rule
Want to support this service?
Thanks!
Report errors in
this rule. Since these rules are converted to HTML by machine, it's possible errors have been made. Please
help us improve these rules by clicking the Report FCC Rule Errors link to report an error.
hallikainen.com
Helping make public information public