Goto Section: 15.109 | 15.113 | Table of Contents

FCC 15.111
Revised as of October 1, 2008
Goto Year:2007 | 2009
  Sec.  15.111   Antenna power conduction limits for receivers.

   (a) In addition to the radiated emission limits, receivers that operate
   (tune) in the frequency range 30 to 960 MHz and CB receivers that provide
   terminals for the connection of an external receiving antenna may be tested
   to demonstrate compliance with the provisions of  Sec. 15.109 with the antenna
   terminals shielded and terminated with a resistive termination equal to the
   impedance specified for the antenna, provided these receivers also comply
   with  the following: With the receiver antenna terminal connected to a
   resistive termination equal to the impedance specified or employed for the
   antenna, the power at the antenna terminal at any frequency within the range
   of measurements specified in  Sec. 15.33 shall not exceed 2.0 nanowatts.

   (b) CB receivers and receivers that operate (tune) in the frequency range 30
   to 960 MHz that are provided only with a permanently attached antenna shall
   comply with the radiated emission limitations in this part, as measured with
   the antenna attached.


Goto Section: 15.109 | 15.113

Goto Year: 2007 | 2009
CiteFind - See documents on FCC website that cite this rule

Want to support this service?
Thanks!

Report errors in this rule. Since these rules are converted to HTML by machine, it's possible errors have been made. Please help us improve these rules by clicking the Report FCC Rule Errors link to report an error.
hallikainen.com
Helping make public information public