Goto Section: 15.13 | 15.17 | Table of Contents
Revised as of October 1, 2008
Goto Year:2007 |
Sec. 15.15 General technical requirements.
(a) An intentional or unintentional radiator shall be constructed in
accordance with good engineering design and manufacturing practice.
Emanations from the device shall be suppressed as much as practicable, but
in no case shall the emanations exceed the levels specified in these rules.
(b) Except as follows, an intentional or unintentional radiator must be
constructed such that the adjustments of any control that is readily
accessible by or intended to be accessible to the user will not cause
operation of the device in violation of the regulations. Access BPL
equipment shall comply with the applicable standards at the control
adjustment that is employed. The measurement report used in support of an
application for Certification and the user instructions for Access BPL
equipment shall clearly specify the user-or installer-control settings that
are required for conformance with these regulations.
(c) Parties responsible for equipment compliance should note that the limits
specified in this part will not prevent harmful interference under all
circumstances. Since the operators of part 15 devices are required to cease
operation should harmful interference occur to authorized users of the radio
frequency spectrum, the parties responsible for equipment compliance are
encouraged to employ the minimum field strength necessary for
communications, to provide greater attenuation of unwanted emissions than
required by these regulations, and to advise the user as to how to resolve
harmful interference problems (for example, see Sec. 15.105(b)).
[ 54 FR 17714 , Apr. 25, 1989, as amended at 70 FR 1373 , Jan. 7, 2005]
Goto Section: 15.13 | 15.17
Goto Year: 2007 |
CiteFind - See documents on FCC website that
cite this rule
Want to support this service?
Report errors in
this rule. Since these rules are converted to HTML by machine, it's possible errors have been made. Please
help us improve these rules by clicking the Report FCC Rule Errors link to report an error.
Helping make public information public