Goto Section: 80.876 | 80.880 | Table of Contents

FCC 80.877
Revised as of October 1, 2008
Goto Year:2007 | 2009
  Sec.  80.877   Controls and indicators required for VHF radiotelephone
installation.

   The controls and indicators used on equipment of the VHF radiotelephone
   installation must meet the following standards:

   (a) The size of controls must easily permit normal adjustment. The function
   and the setting of the controls must be clearly indicated.d

   (b) Controls must be illuminated to permit satisfactory operation of the
   equipment.

   (c) Means must be provided to reduce to extinction any light output from the
   equipment which could affect safety of navigation.

   (d) An on/off switch must be provided for the entire installation with a
   visual indication that the installation is switched on.

   (e) The equipment must indicate the channel number, as given in the Radio
   Regulations, to which it is tuned. It must allow the determination of the
   channel number under all conditions of external lighting. Channel 16 must be
   distinctively marked.

   (f) The receiver must have a manual volume control and a squelch control.

   (g) If the external controls are on a separate control unit and more than
   one such control unit is provided, the one on the bridge must have priority
   over the others. When there is more than one control unit, indication must
   be given to the other(s) that the transmitter is in operation.


Goto Section: 80.876 | 80.880

Goto Year: 2007 | 2009
CiteFind - See documents on FCC website that cite this rule

Want to support this service?
Thanks!

Report errors in this rule. Since these rules are converted to HTML by machine, it's possible errors have been made. Please help us improve these rules by clicking the Report FCC Rule Errors link to report an error.
hallikainen.com
Helping make public information public