Goto Section: 95.1215 | 95.1219 | Table of Contents

FCC 95.1217
Revised as of October 1, 2008
Goto Year:2007 | 2009
  Sec.  95.1217   Labeling requirements.

   (a) Medical implant programmer/controller transmitters shall be labeled as
   provided in part 2 of this chapter and shall bear the following statement in
   a conspicuous location on the device:

   This device may not interfere with stations operating in the 400.150–406.000
   MHz band in the Meteorological Aids, Meteorological Satellite, and Earth
   Exploration Satellite Services and must accept any interference received,
   including interference that may cause undesired operation.

   (b) Where a medical implant programmer/control transmitter is constructed in
   two or more sections connected by wire and marketed together, the statement
   specified in this section is required to be affixed only to the main control
   unit.

   (c) Medical implant transmitters shall be identified with a serial number.
   The  FCC ID number associated with the transmitter and the information
   required by  Sec. 2.925 of the FCC Rules may be placed in the instruction manual
   for the transmitter and on the shipping container for the transmitter, in
   lieu of being placed directly on the transmitter.


Goto Section: 95.1215 | 95.1219

Goto Year: 2007 | 2009
CiteFind - See documents on FCC website that cite this rule

Want to support this service?
Thanks!

Report errors in this rule. Since these rules are converted to HTML by machine, it's possible errors have been made. Please help us improve these rules by clicking the Report FCC Rule Errors link to report an error.
hallikainen.com
Helping make public information public