Goto Section: 15.242 | 15.245 | Table of Contents
Revised as of October 1, 2009
Goto Year:2008 |
§ 15.243 Operation in the band 890–940 MHz.
(a) Operation under the provisions of this section is restricted to
devices that use radio frequency energy to measure the characteristics
of a material. Devices operated pursuant to the provisions of this
section shall not be used for voice communications or the transmission
of any other type of message.
(b) The field strength of any emissions radiated within the specified
frequency band shall not exceed 500 microvolts/meter at 30 meters. The
emission limit in this paragraph is based on measurement
instrumentation employing an average detector. The provisions in § 15.35
for limiting peak emissions apply.
(c) The field strength of emissions radiated on any frequency outside
of the specified band shall not exceed the general radiated emission
limits in § 15.209.
(d) The device shall be self-contained with no external or readily
accessible controls which may be adjusted to permit operation in a
manner inconsistent with the provisions in this section. Any antenna
that may be used with the device shall be permanently attached thereto
and shall not be readily modifiable by the user.
Goto Section: 15.242 | 15.245
Goto Year: 2008 |
CiteFind - See documents on FCC website that
cite this rule
Want to support this service?
Report errors in
this rule. Since these rules are converted to HTML by machine, it's possible errors have been made. Please
help us improve these rules by clicking the Report FCC Rule Errors link to report an error.
Helping make public information public