Goto Section: 24.132 | 24.134 | Table of Contents

FCC 24.133
Revised as of October 1, 2010
Goto Year:2009 | 2011
  §  24.133   Emission limits.

   (a) The power of any emission shall be attenuated below the transmitter
   power (P), as measured in accordance with § 24.132(f), in accordance
   with the following schedule:

   (1) For transmitters authorized a bandwidth greater than 10 kHz:

   (i) On any frequency outside the authorized bandwidth and removed from
   the edge of the authorized bandwidth by a displacement frequency
   (f[d]in kHz) of up to and including 40 kHz: at least 116
   Log[10]((f[d]+10)/6.1) decibels or 50 plus 10 Log[10](P) decibels or 70
   decibels, whichever is the lesser attenuation;

   (ii) On any frequency outside the authorized bandwidth and removed from
   the edge of the authorized bandwidth by a displacement frequency
   (f[d]in kHz) of more than 40 kHz: at least 43+10 Log[10](P) decibels or
   80 decibels, whichever is the lesser attenuation.

   (2) For transmitters authorized a bandwidth of 10 kHz:

   (i) On any frequency outside the authorized bandwidth and removed from
   the edge of the authorized bandwidth by a displacement frequency
   (f[d]in kHz) of up to and including 20 kHz: at least 116 *
   Log[10]((f[d]+5)/3.05) decibels or 50+10 *Log[10](P) decibels or 70
   decibels, whichever is the lesser attenuation;

   (ii) On any frequency outside the authorized bandwidth and removed from
   the edge of the authorized bandwidth by a displacement frequency
   (f[d]in kHz) of more than 20 kHz: at least 43+10 Log[10](P) decibels or
   80 decibels, whichever is the lesser attenuation.

   (b) The measurements of emission power can be expressed in peak or
   average values provided they are expressed in the same parameters as
   the transmitter power.

   (c) When an emission outside of the authorized bandwidth causes harmful
   interference, the Commission may, at its discretion, require greater
   attenuation than specified in this section.

   (d) The following minimum spectrum analyzer resolution bandwidth
   settings will be used: 300 Hz when showing compliance with paragraphs
   (a)(1)(i) and (a)(2)(i) of this section; and 30 kHz when showing
   compliance with paragraphs (a)(1)(ii) and (a)(2)(ii) of this section.

   [ 58 FR 59183 , Nov. 8, 1993. Redesignated at  59 FR 18499 , April 19,
   1994, as amended at  59 FR 14119 , Mar. 25, 1994;  66 FR 10968 , Feb. 21,
   2001]


Goto Section: 24.132 | 24.134

Goto Year: 2009 | 2011
CiteFind - See documents on FCC website that cite this rule

Want to support this service?
Thanks!

Report errors in this rule. Since these rules are converted to HTML by machine, it's possible errors have been made. Please help us improve these rules by clicking the Report FCC Rule Errors link to report an error.
hallikainen.com
Helping make public information public