Goto Section: 80.1181 | 80.1185 | Table of Contents

FCC 80.1183
Revised as of October 1, 2010
Goto Year:2009 | 2011
  §  80.1183   Remote control for maneuvering or navigation.

   (a) An on-board station may be used for remote control of maneuvering
   or navigation control systems aboard the same ship or, where that ship
   is towing a second ship, aboard the towed ship.

   (b) The remote control system transmissions must contain a
   synchronization signal and a message signal composed of a documentation
   number group, a company control group, an actuation instruction group,
   and a termination of transmission group.

   (1) The synchronization signal must be the control character "SYN",
   transmitted twice.

   (2) The message signal is composed of the following groups:

   (i) The documentation number group must be transmitted once and be the
   ship's U.S. Coast Guard documentation number or, if the ship is not
   documented, the call sign of the on-board station.

   (ii) The company control group, composed of three letters taken from
   AAA through ZZZ, which must be transmitted one time.

   (iiii) The actuation instruction group, composed of two letters taken
   from AA through ZZ, which must be transmitted one time.

   (iv) The termination of transmission group, composed of the control
   character "EM", which must be transmitted twice.

   (c) The receiving system must:

   (1) Reject any actuation instruction until it recognizes and accepts
   the company control group.

   (2) Reject any company control group until it recognizes and accepts
   the documentation number group.

   (d) The emission employed must be G2D. The provisions applicable to G3E
   emission are also applicable to G2D emission.

   (e) The binary information must be applied to the carrier as
   frequency-shift keying (FSK) of the standard tones 1070 and 1270 Hz.
   "0" (low) must correspond to 1070 Hz and "1" (high) must correspond to
   1270 Hz. The signalling rate must be 300 bits per second.

   (f) The alphabet employed must be the United States of America Standard
   Code for Information Interchange (USASCII), contained in the United
   States of America Standards Institute publication USAS X3.4-1968.

   (1) The bit sequence must be least significant bit first to most
   significant bit (bit 1 through 7), consecutively.

   (2) The character structure must consist of 8 bits (seven bits plus one
   character parity bit) having equal time intervals.

   (3) "Odd" parity is required.

Mobile-Satellite Stations


Goto Section: 80.1181 | 80.1185

Goto Year: 2009 | 2011
CiteFind - See documents on FCC website that cite this rule

Want to support this service?
Thanks!

Report errors in this rule. Since these rules are converted to HTML by machine, it's possible errors have been made. Please help us improve these rules by clicking the Report FCC Rule Errors link to report an error.
hallikainen.com
Helping make public information public