Goto Section: 95.605 | 95.621 | Table of Contents

FCC 95.607
Revised as of October 1, 2010
Goto Year:2009 | 2011
  §  95.607   CB transmitter modification.

   Only the holder of the grant of authorization of the particular
   certificated CB transmitter may make the modifications permitted under
   the provisions for certification (see part 2 of this chapter.) No
   grantee shall make any of the following modifications to the
   transmitter without prior written permission from the FCC (Federal
   Communications Commission):

   (a) The addition of any accessory or device not specified in the
   application for certification and authorized by the FCC in granting the
   certification;

   (b) The addition of any switch, control or external connection;

   (c) Any modification to provide for additional transmitting
   frequencies, increased modulation level, a different form of
   modulation, or increased TP (RF transmitter power expressed in W
   (watts), either mean power (TP averaged over at least 30 cycles of the
   lowest modulating frequency, typically 0.1 seconds at maximum power) or
   peak envelope power (TP averaged during 1 RF cycle at the highest crest
   of the modulation envelope), as measured at the transmitter output
   antenna terminals.)

   [ 53 FR 36789 , Sept. 22, 1988, as amended at  63 FR 36610 , July 7, 1998]

Technical Standards


Goto Section: 95.605 | 95.621

Goto Year: 2009 | 2011
CiteFind - See documents on FCC website that cite this rule

Want to support this service?
Thanks!

Report errors in this rule. Since these rules are converted to HTML by machine, it's possible errors have been made. Please help us improve these rules by clicking the Report FCC Rule Errors link to report an error.
hallikainen.com
Helping make public information public