Goto Section: 95.1215 | 95.1219 | Table of Contents
Revised as of October 1, 2011
Goto Year:2010 |
§ 95.1217 Labeling requirements.
(a) MedRadio programmer/control transmitters shall be labeled as
provided in part 2 of this chapter and shall bear the following
statement in a conspicuous location on the device:
"This device may not interfere with stations operating in the
400.150-406.000 MHz band in the Meteorological Aids, Meteorological
Satellite, and Earth Exploration Satellite Services and must accept any
interference received, including interference that may cause undesired
The statement may be placed in the instruction manual for the
transmitter where it is not feasible to place the statement on the
(b) Where a MedRadio programmer/control transmitter is constructed in
two or more sections connected by wire and marketed together, the
statement specified in this section is required to be affixed only to
the main control unit.
(c) MedRadio transmitters shall be identified with a serial number. The
FCC ID number associated with a medical implant transmitter and the
information required by § 2.925 of this chapter may be placed in the
instruction manual for the transmitter and on the shipping container
for the transmitter, in lieu of being placed directly on the
Goto Section: 95.1215 | 95.1219
Goto Year: 2010 |
CiteFind - See documents on FCC website that
cite this rule
Want to support this service?
Report errors in
this rule. Since these rules are converted to HTML by machine, it's possible errors have been made. Please
help us improve these rules by clicking the Report FCC Rule Errors link to report an error.
Helping make public information public