Goto Section: 95.1215 | 95.1219 | Table of Contents
FCC 95.1217
Revised as of October 2, 2015
Goto Year:2014 |
2016
§ 95.1217 Labeling requirements.
(a)(1) MedRadio programmer/control transmitters operating in the 401-406 MHz
band shall be labeled as provided in part 2 of this chapter and shall bear
the following statement in a conspicuous location on the device:
“This device may not interfere with stations operating in the
400.150-406.000 MHz band in the Meteorological Aids, Meteorological
Satellite, and Earth Exploration Satellite Services and must accept any
interference received, including interference that may cause undesired
operation.”
The statement may be placed in the instruction manual for the transmitter
where it is not feasible to place the statement on the device.
(2) MedRadio programmer/control transmitters operating in the 413-419 MHz,
426-432 MHz, 438-444 MHz, and 451-457 MHz bands shall be labeled as provided
in part 2 of this chapter and shall bear the following statement in a
conspicuous location on the device:
“This device may not interfere with stations authorized to operate on a
primary basis in the 413-419 MHz, 426-432 MHz, 438-444 MHz, and 451-457 MHz
bands, and must accept any interference received, including interference
that may cause undesired operation.”
The statement may be placed in the instruction manual for the transmitter
where it is not feasible to place the statement on the device.
(3) MedRadio programmer/control transmitters operating in the 2360-2400 MHz
band shall be labeled as provided in part 2 of this chapter and shall bear
the following statement in a conspicuous location on the device:
“This device may not interfere with stations authorized to operate on a
primary basis in the 2360-2400 MHz band, and must accept any interference
received, including interference that may cause undesired operation.”
The statement may be placed in the instruction manual for the transmitter
where it is not feasible to place the statement on the device.
(b) Where a MedRadio programmer/control transmitter is constructed in two or
more sections connected by wire and marketed together, the statement
specified in this section is required to be affixed only to the main control
unit.
(c) MedRadio transmitters shall be identified with a serial number, except
that in the 2360-2400 MHz band only the MedRadio programmer/controller
transmitter shall be identified with a serial number. The FCC ID number
associated with a medical implant transmitter and the information required
by § 2.925 of this chapter may be placed in the instruction manual for the
transmitter and on the shipping container for the transmitter, in lieu of
being placed directly on the transmitter.
[ 74 FR 22709 , May 14, 2009, as amended at 77 FR 4270 , Jan. 27, 2012; 77 FR 55734 , Sept. 11, 2012]
return arrow Back to Top
Goto Section: 95.1215 | 95.1219
Goto Year: 2014 |
2016
CiteFind - See documents on FCC website that
cite this rule
Want to support this service?
Thanks!
Report errors in
this rule. Since these rules are converted to HTML by machine, it's possible errors have been made. Please
help us improve these rules by clicking the Report FCC Rule Errors link to report an error.
hallikainen.com
Helping make public information public