§ 2.1077   Compliance information.

   (a) If a product must be tested and authorized under a Declaration of
   Conformity, a compliance information statement shall be supplied with
   the product at the time of marketing or importation, containing the
   following information:

   (1) Identification of the product, e.g., name and model number;

   (2) A statement, similar to that contained in § 15.19(a)(3) of this
   chapter, that the product complies with part 15 of this chapters; and

   (3) The identification, by name, address and telephone number, of the
   responsible party, as defined in § 2.909. The responsible party for a
   Declaration of Conformity must be located within the United States.

   (b) If a product is assembled from modular components that, by
   themselves, are authorized under a Declaration of Conformity and/or a
   grant of certification, and the assembled product is also subject to
   authorization under a Declaration of Conformity but, in accordance with
   the applicable regulations, does not require additional testing, the
   product shall be supplied, at the time of marketing or importation,
   with a compliance information statement containing the following
   information:

   (1) Identification of the assembled product, e.g., name and model
   number.

   (2) Identification of the modular components used in the assembly. A
   modular component authorized under a Declaration of Conformity shall be
   identified as specified in paragraph (a)(1) of this section. A modular
   component authorized under a grant of certification shall be identified
   by name and model number (if applicable) along with the FCC Identifier
   number.

   (3) A statement that the product complies with part 15 of this chapter.

   (4) The identification, by name, address and telephone number, of the
   responsible party who assembled the product from modular components, as
   defined in § 2.909. The responsible party for a Declaration of
   Conformity must be located within the United States.

   (5) Copies of the compliance information statements for each modular
   component used in the system that is authorized under a Declaration of
   Conformity.

   (c) The compliance information statement shall be included in the
   user's manual or as a separate sheet. In cases where the manual is
   provided only in a form other than paper, such as on a computer disk or
   over the Internet, the information required by this section may be
   included in the manual in that alternative form, provided the user can
   reasonably be expected to have the capability to access information in
   that form.

   [ 61 FR 31048 , June 19, 1996, as amended at  62 FR 41880 , Aug. 4, 1997;
    69 FR 71383 , Dec. 9, 2004]

   return arrow Back to Top

Radiofrequency Radiation Exposure

   return arrow Back to Top