Goto Section: 15.202 | 15.204 | Table of Contents

FCC 15.203
Revised as of October 1, 2019
Goto Year:2018 | 2020
  § 15.203   Antenna requirement.

   An intentional radiator shall be designed to ensure that no antenna
   other than that furnished by the responsible party shall be used with
   the device. The use of a permanently attached antenna or of an antenna
   that uses a unique coupling to the intentional radiator shall be
   considered sufficient to comply with the provisions of this section.
   The manufacturer may design the unit so that a broken antenna can be
   replaced by the user, but the use of a standard antenna jack or
   electrical connector is prohibited. This requirement does not apply to
   carrier current devices or to devices operated under the provisions of
   § § 15.211, 15.213, 15.217, 15.219, 15.221, or § 15.236. Further, this
   requirement does not apply to intentional radiators that must be
   professionally installed, such as perimeter protection systems and some
   field disturbance sensors, or to other intentional radiators which, in
   accordance with § 15.31(d), must be measured at the installation site.
   However, the installer shall be responsible for ensuring that the
   proper antenna is employed so that the limits in this part are not
   exceeded.

   [ 82 FR 41559 , Sept. 1, 2017]

   return arrow Back to Top


Goto Section: 15.202 | 15.204

Goto Year: 2018 | 2020
CiteFind - See documents on FCC website that cite this rule

Want to support this service?
Thanks!

Report errors in this rule. Since these rules are converted to HTML by machine, it's possible errors have been made. Please help us improve these rules by clicking the Report FCC Rule Errors link to report an error.
hallikainen.com
Helping make public information public