Goto Section: 15.23 | 15.27 | Table of Contents
Revised as of October 1, 2020
Goto Year:2019 |
§ 15.25 Kits.
A TV interface device, including a cable system terminal device, which
is marketed as a kit shall comply with the following requirements:
(a) All parts necessary for the assembled device to comply with the
technical requirements of this part must be supplied with the kit. No
mechanism for adjustment that can cause operation in violation of the
requirements of this part shall be made accessible to the builder.
(b) At least two units of the kit shall be assembled in exact
accordance with the instructions supplied with the product to be
marketed. If all components required to fully complete the kit (other
than those specified in paragraph (a) of this section that are needed
for compliance with the technical provisions and must be included with
the kit) are not normally furnished with the kit, assembly shall be
made using the recommended components. The assembled units shall be
certified or authorized under Supplier's Declaration of Conformity, as
appropriate, pursuant to the requirements of this part.
(1) The measurement data required for a TV interface device subject to
certification shall be obtained for each of the two units and submitted
with an application for certification pursuant to subpart J of part 2
of this chapter.
(2) The measurement data required for a TV interface device subject to
Supplier's Declaration of Conformity shall be obtained for the units
tested and retained on file pursuant to the provisions of subpart J of
part 2 of this chapter.
(c) A copy of the exact instructions that will be provided for assembly
of the device shall be submitted with an application for certification.
Those parts that are not normally furnished shall be detailed in the
application for certification.
(d) In lieu of the label required by § 15.19, the following label, along
with the label bearing the FCC identifier and other information
specified in § § 2.925 and 2.926, shall be included in the kit with
instructions to the builder that it shall be attached to the completed
(Name of Grantee)
This device can be expected to comply with part 15 of the FCC Rules
provided it is assembled in exact accordance with the instructions
provided with this kit. Operation is subject to the following
conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received including
interference that may cause undesired operation.
(e) For the purpose of this section, circuit boards used as repair
parts for the replacement of electrically identical defective circuit
boards are not considered to be kits.
[ 54 FR 17714 , Apr. 25, 1989,as amended at 63 FR 36602 , July 7, 1998; 82 FR 50830 , Nov. 2, 2017]
Goto Section: 15.23 | 15.27
Goto Year: 2019 |
CiteFind - See documents on FCC website that
cite this rule
Want to support this service?
Report errors in
this rule. Since these rules are converted to HTML by machine, it's possible errors have been made. Please
help us improve these rules by clicking the Report FCC Rule Errors link to report an error.
Helping make public information public