§  73.6025   Antenna system and station location.

   (a) Applications for modified Class A TV facilities proposing the use
   of directional antenna systems must be accompanied by the following:

   (1) Complete description of the proposed antenna system, including the
   manufacturer and model number of the proposed directional antenna. In
   the case of a composite antenna composed of two or more individual
   antennas, the antenna should be described as a "composite" antenna. A
   full description of the design of the antenna should also be submitted.

   (2) Relative field horizontal plane pattern (horizontal polarization
   only) of the proposed directional antenna. A value of 1.0 should be
   used for the maximum radiation. The plot of the pattern should be
   oriented so that 0 degrees (True North) corresponds to the maximum
   radiation of the directional antenna or, alternatively in the case of a
   symmetrical pattern, the line of symmetry. Where mechanical beam tilt
   is intended, the amount of tilt in degrees of the antenna vertical axis
   and the orientation of the downward tilt with respect to true North
   must be specified, and the horizontal plane pattern must reflect the
   use of mechanical beam tilt.

   (3) A tabulation of the relative field pattern required in paragraph
   (a)(2), of this section. The tabulation should use the same zero degree
   reference as the plotted pattern, and be tabulated at least every 10
   degrees. In addition, tabulated values of all maxima and minima, with
   their corresponding azimuths, should be submitted.

   (4) Horizontal and vertical plane radiation patterns showing the
   effective radiated power, in dBk, for each direction. Sufficient
   vertical plane patterns must be included to indicate clearly the
   radiation characteristics of the antenna above and below the horizontal
   plane. In cases where the angles at which the maximum vertical
   radiation varies with azimuth, a separate vertical radiation pattern
   must be provided for each pertinent radial direction.

   (5) The horizontal and vertical plane patterns that are required are
   the patterns for the complete directional antenna system. In the case
   of a composite antenna composed of two or more individual antennas,
   this means that the patterns for the composite antenna, not the
   patterns for each of the individual antennas, must be submitted.

   (b) Applications for modified Class A TV facilities proposing to locate
   antennas within 61.0 meters (200 feet) of other Class A TV or TV
   broadcast antennas operating on a channel within 20 percent in
   frequency of the proposed channel, or proposing the use of antennas on
   Channels 5 or 6 within 61.0 meters (200 feet) of FM broadcast antennas,
   must include a showing as to the expected effect, if any, of such
   proximate operation.

   (c) Where a Class A TV licensee or permittee proposes to mount its
   antenna on or near an AM tower, as defined in § 1.30002, the Class A TV
   licensee or permittee must comply with § 1.30003 or § 1.30002.

   (d) Class A TV stations are subject to the provisions in § 73.685(d)
   regarding blanketing interference.

   [ 65 FR 30009 , May 10, 2000, as amended at  78 FR 66298 , Nov. 5, 2013]