Goto Section: 15.202 | 15.204 | Table of Contents
Revised as of November 27, 2020
Goto Year:2020 |
§ 15.203 Antenna requirement.
An intentional radiator shall be designed to ensure that no antenna
other than that furnished by the responsible party shall be used with
the device. The use of a permanently attached antenna or of an antenna
that uses a unique coupling to the intentional radiator shall be
considered sufficient to comply with the provisions of this section.
The manufacturer may design the unit so that a broken antenna can be
replaced by the user, but the use of a standard antenna jack or
electrical connector is prohibited. This requirement does not apply to
carrier current devices or to devices operated under the provisions of
§ § 15.211, 15.213, 15.217, 15.219, 15.221, or § 15.236. Further, this
requirement does not apply to intentional radiators that must be
professionally installed, such as perimeter protection systems and some
field disturbance sensors, or to other intentional radiators which, in
accordance with § 15.31(d), must be measured at the installation site.
However, the installer shall be responsible for ensuring that the
proper antenna is employed so that the limits in this part are not
[ 82 FR 41559 , Sept. 1, 2017]
Goto Section: 15.202 | 15.204
Goto Year: 2020 |
CiteFind - See documents on FCC website that
cite this rule
Want to support this service?
Report errors in
this rule. Since these rules are converted to HTML by machine, it's possible errors have been made. Please
help us improve these rules by clicking the Report FCC Rule Errors link to report an error.
Helping make public information public