FCC Web Documents citing 15.509

as compiled by hallikainen.com/FccRules on 2012 07 01

• http://hraunfoss.fcc.gov/edocs_public/attachmatch/DA-02-1658A1.doc http://hraunfoss.fcc.gov/edocs_public/attachmatch/DA-02-1658A1.pdf http://hraunfoss.fcc.gov/edocs_public/attachmatch/DA-02-1658A1.txt
  • has been obtained regarding these devices. Further, it does not appear that any hardship would result from the existing operating restrictions for medical imaging systems. Motion for Interim Stay of Enforcement On June 17, 2002, the GPRIC filed a Motion for Interim Stay of Enforcement of rules that affect GPR and wall imaging devices. These rules include 47 C.F.R. § 15.509(a) (requiring all GPR bandwidth to be below 960 MHz); § 15.509(b)(1) (limiting GPR operation to law enforcement, fire and emergency rescue organizations, scientific research institutes, commercial mining companies, and construction companies); § 15.509(d) (setting emission limits for GPR devices below the Part 15 general limits); and § 15.525 (requiring prior coordination of GPR operations with NTIA). GPRIC, which has filed
• http://hraunfoss.fcc.gov/edocs_public/attachmatch/DA-03-1080A1.doc http://hraunfoss.fcc.gov/edocs_public/attachmatch/DA-03-1080A1.pdf http://hraunfoss.fcc.gov/edocs_public/attachmatch/DA-03-1080A1.txt
  • & Co.; Delta Air Lines, Inc.; Garmin International, Inc.; General Aviation Manufacturers Association; Global Locate, Inc.; National Business Aviation Association, Inc.; NavCom Technology, Inc.; Northwest Airlines, Inc.; PanAmSat Corporation; QUALCOMM Incorporated; Raytheon Company; Rockwell Collins, Inc.; Sirius Satellite Radio Inc.; Tendler Cellular, Inc.; Thales Navigation; Trimble Navigation Ltd.; United Airlines; and United States GPS Industry Council. See 47 C.F.R. §§ 15.509-15.519. 47 C.F.R. §§ 15.209 and 15.521(c). See First Report and Order in ET Docket No. 98-153, 17 FCC Rcd 7435, 7506 (2002). Id. See, also, 47 C.F.R. §§ 15.3(h), (i) and (k), 15.107, and 15.109. Memorandum Opinion and Order and Further Notice of Proposed Rule Making in ET Docket No. 98-153, FCC 03-33, released March 12, 2003, at para. 150.
• http://hraunfoss.fcc.gov/edocs_public/attachmatch/DA-11-899A1.doc http://hraunfoss.fcc.gov/edocs_public/attachmatch/DA-11-899A1.pdf http://hraunfoss.fcc.gov/edocs_public/attachmatch/DA-11-899A1.txt
  • 15.503(h) of our rules for its Wallscanner D-tect 150 Professional (``wallscanner'') device and for functionally identical versions of that device. This will permit Bosch to import and market its wallscanner device upon receiving an FCC equipment authorization and complying with all other requirements of the FCC's rules, including the technical and operational requirements for unlicensed ultra-wideband imaging systems in Section 15.509. We find that granting this waiver request is in the public interest in that it will allow deployment of a product with beneficial applications in building construction, as well as inspection and maintenance of buildings in the United States. Bosch states that its wallscanner device is an ultra-wideband (UWB) imaging device for use by skilled professional workers in the building
• http://hraunfoss.fcc.gov/edocs_public/attachmatch/DA-12-41A1.doc http://hraunfoss.fcc.gov/edocs_public/attachmatch/DA-12-41A1.pdf http://hraunfoss.fcc.gov/edocs_public/attachmatch/DA-12-41A1.txt
  • requirement in Section 15.503(d), which specifies the minimum operational bandwidth of an UWB transmitter, and the UWB measurement procedure in Section 15.521(d). This action will permit CWCI to manufacture and market the 3d-Radar device upon receiving FCC equipment authorization. We also will require CWCI to comply with all other technical and operational requirements for unlicensed UWB GPR devices in Section 15.509. We find that granting this waiver request is in the public interest because it will make available a product that will improve the safety of our nation's transportation infrastructure without increasing the potential for interference to authorized radio services. BACKGROUND On February 14, 2002, the Commission adopted regulations to permit the operation of UWB transmitters. Categories of UWB devices that
• http://hraunfoss.fcc.gov/edocs_public/attachmatch/FCC-02-48A1.doc http://hraunfoss.fcc.gov/edocs_public/attachmatch/FCC-02-48A1.pdf http://hraunfoss.fcc.gov/edocs_public/attachmatch/FCC-02-48A1.txt
  • very little energy absorption. While the record showed that the GPS and other authorized services are generally robust against interference from devices, such as GPRs, with low PRFs, the record did not directly support extending this conclusion to all systems operating in this low frequency range. Other technical and operational requirements for low-frequency imaging systems are contained in new Section 15.509 in Appendix D. The specifics of the coordination process are detailed in the Section 15.525 contained in Appendix D of this Order. High-frequency Imaging Systems. The second class of imaging systems are those that operate with a -10 dB bandwidth between 3.10 GHz and 10.6 GHz. Emission levels from this category of device must meet an emissions mask for the
• http://hraunfoss.fcc.gov/edocs_public/attachmatch/FCC-03-33A1.doc http://hraunfoss.fcc.gov/edocs_public/attachmatch/FCC-03-33A1.pdf http://hraunfoss.fcc.gov/edocs_public/attachmatch/FCC-03-33A1.txt
  • charts that were included in the press package along with the News Release of February 14, 2002, announcing the adoption of the R&O unintentionally did not reflect the emission limits below 960 MHz. The UWB emission limits below 960 MHz are the Part 15 general emission limits contained in 47 C.F.R. § 15.209, as correctly stated in 47 C.F.R. §§ 15.509(d), 15.511(d), 15.513(d), 15.515(d), 15.517(c), and 15.519(c). Accordingly, no change to our regulations is required to implement this clarification. Vehicular radar systems in the 22-29 GHz band The UWB regulations permit the operation of vehicular radar systems in the 22-29 GHz band. UWB vehicular radar systems are required to operate at all times with a minimum 500 MHz bandwidth and may
• http://hraunfoss.fcc.gov/edocs_public/attachmatch/FCC-04-285A1.doc http://hraunfoss.fcc.gov/edocs_public/attachmatch/FCC-04-285A1.pdf http://hraunfoss.fcc.gov/edocs_public/attachmatch/FCC-04-285A1.txt
  • function. Unless otherwise specified, measurements above 1000 MHz shall be performed using a minimum resolution bandwidth of 1 MHz. When average radiated emission measurements are specified in this part, including average emission measurements below 1000 MHz, there also is a limit on the peak level of the radio frequency emissions. Unless otherwise specified, e.g., see §§ 15.250, 15.252, 15.255, and 15.509-15.519 of this part, the limit on peak radio frequency emissions is 20 dB above the maximum permitted average emission limit applicable to the equipment under test. This peak limit applies to the total peak emission level radiated by the device, e.g., the total peak power level. Note that the use of a pulse desensitization correction factor may be needed to
• http://hraunfoss.fcc.gov/edocs_public/attachmatch/FCC-08-263A1.doc http://hraunfoss.fcc.gov/edocs_public/attachmatch/FCC-08-263A1.pdf http://hraunfoss.fcc.gov/edocs_public/attachmatch/FCC-08-263A1.txt
  • the UltraSensor devices be located between 80 and 600 MHz, and that the radiated emissions at or below 960 MHz from an UltraSensor device operating under this waiver shall not exceed the emission levels in Section 15.209. Above 960 MHz, the UltraSensor device shall not exceed the emission levels pertaining to ground penetrating radars and wall imaging devices in Section 15.509. These emission limits, in combination with the operating constraints we are placing on UltraSensor devices, will minimize the potential for harmful interference to authorized federal and non-federal systems. We will also require that the UltraSensor devices be installed beyond a minimum of 24 meters (78 feet) distance separation to the nearest boundary of the customer's property at any location for
• http://hraunfoss.fcc.gov/edocs_public/attachmatch/FCC-11-79A1.doc http://hraunfoss.fcc.gov/edocs_public/attachmatch/FCC-11-79A1.pdf http://hraunfoss.fcc.gov/edocs_public/attachmatch/FCC-11-79A1.txt
  • otherwise specified, measurements above 1000 MHz shall be performed using a minimum resolution bandwidth of 1 MHz. When average radiated emission measurements are specified in this part, including average emission measurements below 1000 MHz, there also is a limit on the peak level of the radio frequency emissions. Unless otherwise specified, e.g., see §§ 15.250, 15.252, 15.253 (b), 15.255, and 15.509-15.519, the limit on peak radio frequency emissions is 20 dB above the maximum permitted average emission limit applicable to the equipment under test. This peak limit applies to the total peak emission level radiated by the device, e.g., the total peak power level. Note that the use of a pulse desensitization correction factor may be needed to determine the total
• http://hraunfoss.fcc.gov/edocs_public/attachmatch/FCC-12-34A1.doc http://hraunfoss.fcc.gov/edocs_public/attachmatch/FCC-12-34A1.pdf http://hraunfoss.fcc.gov/edocs_public/attachmatch/FCC-12-34A1.txt
  • Unless otherwise specified, measurements above 1000 MHz shall be performed using a minimum resolution bandwidth of 1 MHz. When average radiated emission measurements are specified in this part, including average emission measurements below 1000 MHz, there also is a limit on the peak level of the radio frequency emissions. Unless otherwise specified, see, e.g., §§ 15.250, 15.252, 15.255, 15.256 and 15.509-15.519 of this part, the limit on peak radio frequency emissions is 20 dB above the maximum permitted average emission limit applicable to the equipment under test. This peak limit applies to the total peak emission level radiated by the device, e.g., the total peak power level. Note that the use of a pulse desensitization correction factor may be needed to