FCC Web Documents citing 73.212

as compiled by hallikainen.com/FccRules on 2012 07 01

• http://hraunfoss.fcc.gov/edocs_public/attachmatch/DA-06-1572A1.doc http://hraunfoss.fcc.gov/edocs_public/attachmatch/DA-06-1572A1.pdf http://hraunfoss.fcc.gov/edocs_public/attachmatch/DA-06-1572A1.txt
  • filed comments opposing the NCE reservation of vacant Channel 278C2 at Huntsville. KIRK submitted an engineering study alleging that Channel 204C2 and Channel 206C2 are available at the city reference coordinates of Huntsville. KIRK states that these channels are available using minimum Class C2 directional facilities of 25.5 kW ERP and 30 meters HAAT in accordance with Sections 73.211(a)(1)(v), 73.211(b)(1)(i), 73.212(a), and 73.316 of the Commission's rules. The proposed transmitter site for Channel 204C2 and Channel 206C2 is within the affected radius of TV Channel 6 Station KMOS-TV, Sedalia, Missouri. KIRK contends that a NCE station, either on Channel 204C2 or Channel 206C2 would afford full protection to TV Channel 6 Station KMOS-TV under the provisions of Section 73.525 of the
• http://transition.fcc.gov/Bureaus/Mass_Media/Orders/1998/fcc98281.pdf
  • or if the FAA has not yet ruled on a proposed structure, please indicate whether the FAA Notification has been filed with the FAA. Items 6-9: Elevation and Heights. All heights must be in meters, rounded to the nearest whole number. Items 10-11: Effective Radiated Power. The effective radiated power must be entered in kilowatts, and rounded pursuant to Section 73.212. Applicants proposing a beam-tilt antenna must complete Item 11. Item 12: Directional Antenna. If a directional antenna is proposed, the directional antenna must comply with Section 73.316. Applicants need not submit the exact antenna manufacturer, make, model, and size along with FCC Form 301. Applicants proposing a directional antenna must complete the table in Item 12. Relative field values (0.001-1.000)
• http://transition.fcc.gov/Bureaus/Mass_Media/Orders/2000/fcc00019.doc http://transition.fcc.gov/Bureaus/Mass_Media/Orders/2000/fcc00019.pdf
  • of the antenna (AMSL) minus the average height of the terrain AMSL. The Commission's prediction of coverage methodology does not account for HAAT's below 30 meters. In such cases, 30 meters is assumed when contour distances are determined. We will specify ERP to the nearest watt. This differs slightly from the full service FM rounding procedures. See 47 C.F.R. § 73.212. See 47 C.F.R. § 73.316. Manufacturers of suitable antennas can provide assistance in determining the antenna gain of a particular antenna, and also the input power needed to emit a specified effective radiated power. . For towers less than 61 meters in height, FAA approval is not required if the structure is more than eight kilometers from the nearest air
• http://transition.fcc.gov/fcc-bin/audio/DA-06-1572A1.doc http://transition.fcc.gov/fcc-bin/audio/DA-06-1572A1.pdf
  • filed comments opposing the NCE reservation of vacant Channel 278C2 at Huntsville. KIRK submitted an engineering study alleging that Channel 204C2 and Channel 206C2 are available at the city reference coordinates of Huntsville. KIRK states that these channels are available using minimum Class C2 directional facilities of 25.5 kW ERP and 30 meters HAAT in accordance with Sections 73.211(a)(1)(v), 73.211(b)(1)(i), 73.212(a), and 73.316 of the Commission's rules. The proposed transmitter site for Channel 204C2 and Channel 206C2 is within the affected radius of TV Channel 6 Station KMOS-TV, Sedalia, Missouri. KIRK contends that a NCE station, either on Channel 204C2 or Channel 206C2 would afford full protection to TV Channel 6 Station KMOS-TV under the provisions of Section 73.525 of the
• http://transition.fcc.gov/fcc-bin/audio/amfmrule.html
  • agreements and other restrictions on use of channels. [175]TEXT [176]PDF 73.205 Zones. [177]TEXT [178]PDF 73.207 Minimum distance separation between stations. [ [179]Spacing tables ] [180]TEXT [181]PDF 73.208 Reference points and distance computations. [182]TEXT [183]PDF 73.209 Protection from interference. [184]TEXT [185]PDF 73.210 Station classes. [ [186]FM Classes ] [187]TEXT [188]PDF 73.211 Power and antenna height requirements. [ [189]FMpower ] [190]TEXT [191]PDF 73.212 Administrative changes in authorizations. [192]TEXT [193]PDF 73.213 Grandfathered short-spaced stations. [194]TEXT [195]PDF 73.215 Contour protection for short-spaced assignments. [196]TEXT [197]PDF 73.220 Restrictions on use of channels. [198]TEXT [199]PDF 73.232 Territorial exclusivity. [200]TEXT [201]PDF 73.239 Use of common antenna site. [202]TEXT [203]PDF 73.258 Indicating instruments. [204]TEXT [205]PDF 73.267 Determining operating power. [206]TEXT [207]PDF 73.277 Permissible transmissions. [208]TEXT [209]PDF 73.293 Use of
• http://www.fcc.gov/Bureaus/Mass_Media/Orders/1998/fcc98281.pdf
  • or if the FAA has not yet ruled on a proposed structure, please indicate whether the FAA Notification has been filed with the FAA. Items 6-9: Elevation and Heights. All heights must be in meters, rounded to the nearest whole number. Items 10-11: Effective Radiated Power. The effective radiated power must be entered in kilowatts, and rounded pursuant to Section 73.212. Applicants proposing a beam-tilt antenna must complete Item 11. Item 12: Directional Antenna. If a directional antenna is proposed, the directional antenna must comply with Section 73.316. Applicants need not submit the exact antenna manufacturer, make, model, and size along with FCC Form 301. Applicants proposing a directional antenna must complete the table in Item 12. Relative field values (0.001-1.000)
• http://www.fcc.gov/Bureaus/Mass_Media/Orders/2000/fcc00019.doc http://www.fcc.gov/Bureaus/Mass_Media/Orders/2000/fcc00019.pdf http://www.fcc.gov/Bureaus/Mass_Media/Orders/2000/fcc00019.txt
  • of the antenna (AMSL) minus the average height of the terrain AMSL. The Commission's prediction of coverage methodology does not account for HAAT's below 30 meters. In such cases, 30 meters is assumed when contour distances are determined. We will specify ERP to the nearest watt. This differs slightly from the full service FM rounding procedures. See 47 C.F.R. § 73.212. See 47 C.F.R. § 73.316. Manufacturers of suitable antennas can provide assistance in determining the antenna gain of a particular antenna, and also the input power needed to emit a specified effective radiated power. . For towers less than 61 meters in height, FAA approval is not required if the structure is more than eight kilometers from the nearest air
• http://www.fcc.gov/Forms/Form301-CA/301ca.pdf
  • FAA has not yet ruled on a proposed structure, indicate whether the FAA Notification has been filed with the FAA. F. Items 5-7: Elevation and Heights. All heights must be in meters, rounded to the nearest whole number. G. Items 8-9: Effective Radiated Power. The effective radiated power must be entered in kilowatts, and rounded pursuant to 47 C.F.R. Section 73.212. H. Item 10: Transmitting Antenna. Specify the make and model of the proposed antenna. Applicants proposing a directional antenna must complete the table in Item 12. Relative field values (0.001-1.000) must be entered for every 10 degrees on the unit circle. Up to five azimuths may be added at the bottom of the table for additional accuracy. If the "No
• http://www.fcc.gov/Forms/Form301/301.pdf
  • Applicable, or if the FAA has not yet ruled on a proposed structure, indicate whether the FAA Notification has been filed with the FAA. Items 6-9: Elevation and Heights. All heights must be in meters, rounded to the nearest whole number. Items 10-11: Effective Radiated Power. The effective radiated power must be entered in kilowatts, and rounded pursuant to Section 73.212. Applicants proposing a beam-tilt antenna must complete Item 11. Item 12: Directional Antenna. If a directional antenna is proposed, the directional antenna must comply with Section 73.316. Applicants need not submit the exact antenna manufacturer, make, model, and size along with FCC Form 301. Applicants proposing a directional antenna must complete the table in Item 12. Relative field values (0.001-1.000)
• http://www.fcc.gov/Forms/Form302-FM/302fmjune02.pdf
  • will be disregarded. All items must be completed. The response "on file" is not acceptable. The response "not applicable" is not acceptable unless otherwise noted below. Item 1: Channel. The proposed channel must be between 200 and 300. See Section 73.201. Item 2: Effective Radiated Power. The effective radiated power must be entered in kilowatts, and rounded pursuant to Section 73.212. Applicants proposing a beam-tilt antenna must complete Item 2b. Item 3: Transmitter Power Output: The transmitter power output (TPO) must be specified in kilowatts, and rounded pursuant to Section 73.212. Item 4: Antenna Data: Applicant must provide the manufacturer, model number, number of sections and the spacing between antenna sections, in wavelengths. For example: Manufacturer: ERI ShivelyJamproDielectric Model Number: SHP-4AE6810
• http://www.fcc.gov/Forms/Form340/340.pdf
  • Applicable, or if the FAA has not yet ruled on a proposed structure, indicate whether the FAA Notification has been filed with the FAA. Items 6-9: Elevation and Heights. All heights must be in meters, rounded to the nearest whole number. Items 10-11: Effective Radiated Power. The effective radiated power must be entered in kilowatts, and rounded pursuant to Section 73.212. Applicants proposing a beam-tilt antenna must complete Item 10. Item 12: Directional Antenna. If a directional antenna is proposed, the directional antenna must comply with Sections 73.316 and 73.510. Applicants need not submit the exact antenna manufacturer, make, model, and size along with FCC Form 340. Applicants proposing a directional antenna must complete the table in Item 12. Relative field
• http://www.fcc.gov/Forms/Form346/346.pdf
  • FAA has not yet ruled on a proposed structure, indicate whether the FAA Notification has been filed with the FAA. G. Items 7-9: Elevation and Heights. All heights must be in meters, rounded to the nearest whole number. H. Items 10-11: Effective Radiated Power. The effective radiated power must be entered in kilowatts, and rounded pursuant to 47 C.F.R. Section 73.212. Item 11 Exhibit Instructions: The elevation antenna (or radiation) pattern data shall be submitted in Microsoft Office Excel ("XML Spreadsheet") format with the first column containing depression angle values and second (and subsequent, when applicable) column(s) containing relative field values. When applicable, the first row shall list the azimuth angle being tabulated. The range of depression angles shall be 10
• http://www.fcc.gov/Forms/Form349/349.pdf
  • if the FAA has not yet ruled on a proposed structure, indicate whether the FAA Notification has been filed with the FAA. Items 6-8: Elevation and Heights. All heights must be in meters, rounded to the nearest whole number. Item 9: Effective Radiated Power. The effective radiated power must be entered in kilowatts, and rounded pursuant to 47 C.F.R. Section 73.212. Item 10: Transmitting Antenna. All applicants must indicate what type of antenna is to be used, along with the antenna manufacturer and model number. Applicants proposing a directional antenna must specify the antenna rotation in whole degrees. Applicants proposing a directional composite antenna must also complete all other sections in Item 10. Relative field values (0.001-1.000) must be entered for
• http://www.fcc.gov/Forms/Form350/350.pdf
  • be completed. The response "on file" is not acceptable. The response "not applicable" is not acceptable unless otherwise noted below. D. Item 1: Channel. The proposed channel must be between 201 and 300. See 47 C.F.R. Section 73.201. E. Item 2: Effective Radiated Power. The effective radiated power must be entered in kilowatts, and rounded pursuant to 47 C.F.R. Section 73.212. F. Item 3: Transmitter Power Output. The transmitter power output (TPO) must be specified in kilowatts, and rounded pursuant to 47 C.F.R. Section 73.212. G. Item 4: Constructed Facility. The applicant must certify that the facility was constructed as authorized in the underlying construction permit. If there are any differences between the facilities constructed compared with those authorized in the
• http://www.fcc.gov/mb/audio/bickel/amfmrule.html
  • agreements and other restrictions on use of channels. [175]TEXT [176]PDF 73.205 Zones. [177]TEXT [178]PDF 73.207 Minimum distance separation between stations. [ [179]Spacing tables ] [180]TEXT [181]PDF 73.208 Reference points and distance computations. [182]TEXT [183]PDF 73.209 Protection from interference. [184]TEXT [185]PDF 73.210 Station classes. [ [186]FM Classes ] [187]TEXT [188]PDF 73.211 Power and antenna height requirements. [ [189]FMpower ] [190]TEXT [191]PDF 73.212 Administrative changes in authorizations. [192]TEXT [193]PDF 73.213 Grandfathered short-spaced stations. [194]TEXT [195]PDF 73.215 Contour protection for short-spaced assignments. [196]TEXT [197]PDF 73.220 Restrictions on use of channels. [198]TEXT [199]PDF 73.232 Territorial exclusivity. [200]TEXT [201]PDF 73.239 Use of common antenna site. [202]TEXT [203]PDF 73.258 Indicating instruments. [204]TEXT [205]PDF 73.267 Determining operating power. [206]TEXT [207]PDF 73.277 Permissible transmissions. [208]TEXT [209]PDF 73.293 Use of
• http://www.fcc.gov/mb/audio/includes/63-amfmrule.htm
  • agreements and other restrictions on use of channels. [128]TEXT [129]PDF 73.205 Zones. [130]TEXT [131]PDF 73.207 Minimum distance separation between stations. [ [132]Spacing tables ] [133]TEXT [134]PDF 73.208 Reference points and distance computations. [135]TEXT [136]PDF 73.209 Protection from interference. [137]TEXT [138]PDF 73.210 Station classes. [ [139]FM Classes ] [140]TEXT [141]PDF 73.211 Power and antenna height requirements. [ [142]FMpower ] [143]TEXT [144]PDF 73.212 Administrative changes in authorizations. [145]TEXT [146]PDF 73.213 Grandfathered short-spaced stations. [147]TEXT [148]PDF 73.215 Contour protection for short-spaced assignments. [149]TEXT [150]PDF 73.220 Restrictions on use of channels. [151]TEXT [152]PDF 73.232 Territorial exclusivity. [153]TEXT [154]PDF 73.239 Use of common antenna site. [155]TEXT [156]PDF 73.258 Indicating instruments. [157]TEXT [158]PDF 73.267 Determining operating power. [159]TEXT [160]PDF 73.277 Permissible transmissions. [161]TEXT [162]PDF 73.293 Use of