FCC Web Documents citing 74.436
- http://fjallfoss.fcc.gov/edocs_public/attachmatch/FCC-95-412A1.pdf
- operators. 25. Section 74.434 is amended by revising paragraph (b) to read as follows: §74.434 Remote control operation. ***** (b) A remote control system must be designed, installed, and protected so that the transmitter can only be activated or controlled by persons authorized by the licensee. 11490 10 FCC Red No. 22 Federal Communications Commission Record FCC 95-412 26. Section 74.436 is amended by revising paragraph (a) to read as follows: ence has been eliminated. However, short test transmissions may be made during the period of suspended operation to check the efficacy of remedial measures. §74.496 Special requirements for automatic relay stations. (a) An automatic relay station must be designed, in stalled, and protected so that the transmitter can only be
- http://hraunfoss.fcc.gov/edocs_public/attachmatch/FCC-01-92A1.doc http://hraunfoss.fcc.gov/edocs_public/attachmatch/FCC-01-92A1.pdf http://hraunfoss.fcc.gov/edocs_public/attachmatch/FCC-01-92A1.txt
- Section 74.432 is proposed to be amended revising paragraphs (b) and (g) and the first sentence of paragraph (k) to read as follows: § 74.432 Licensing requirements and procedures. * * * * * (b) Base stations may operate as automatic relay stations on the frequencies listed in § 74.402(b)(4) and (c)(1) of this part under the provisions of § 74.436, however, one licensee may not operate such stations on more than two frequency pairs in a single area. * * * * * (g) An application for a remote pickup broadcast station or system shall specify the broadcasting station with which the remote pickup broadcast facility is to be principally used and the licensed area of operation for a system
- http://hraunfoss.fcc.gov/edocs_public/attachmatch/FCC-02-298A1.doc http://hraunfoss.fcc.gov/edocs_public/attachmatch/FCC-02-298A1.pdf http://hraunfoss.fcc.gov/edocs_public/attachmatch/FCC-02-298A1.txt
- * * * Section 74.432 is amended revising paragraphs (b) and (g) and the first sentence of paragraph (k) to read as follows: § 74.432 Licensing requirements and procedures. * * * * * (b) Base stations may operate as automatic relay stations on the frequencies listed in § 74.402(b)(4) and (c)(1) of this part under the provisions of § 74.436, however, one licensee may not operate such stations on more than two frequency pairs in a single area. * * * * * (g) An application for a remote pickup broadcast station or system shall specify the broadcasting station with which the remote pickup broadcast facility is to be principally used and the licensed area of operation for a system
- http://transition.fcc.gov/fcc-bin/audio/FCC-95-412A1.pdf
- operators. 25. Section 74.434 is amended by revising paragraph (b) to read as follows: §74.434 Remote control operation. ***** (b) A remote control system must be designed, installed, and protected so that the transmitter can only be activated or controlled by persons authorized by the licensee. 11490 10 FCC Red No. 22 Federal Communications Commission Record FCC 95-412 26. Section 74.436 is amended by revising paragraph (a) to read as follows: ence has been eliminated. However, short test transmissions may be made during the period of suspended operation to check the efficacy of remedial measures. §74.496 Special requirements for automatic relay stations. (a) An automatic relay station must be designed, in stalled, and protected so that the transmitter can only be
- http://www.fcc.gov/ftp/Bureaus/Mass_Media/Databases/documents_collection/95-412.doc http://www.fcc.gov/ftp/Bureaus/Mass_Media/Databases/documents_collection/95-412.pdf
- licensee. * * * * * Section 74.434 is amended by revising paragraph (b) to read as follows: §74.434 Remote control operation. * * * * * (b) A remote control system must be designed, installed, and protected so that the transmitter can only be activated or controlled by persons authorized by the licensee. * * * * * Section 74.436 is amended by revising paragraph (a) to read as follows: §74.436 Special requirements for automatic relay stations. (a) An automatic relay station must be designed, installed, and protected so that the transmitter can only be activated or controlled by persons authorized by the licensee. * * * * * Section 74.533 is amended by revising paragraph (a)(2) to read as